新葡萄8883官网(集团)有限公司

New products AQMs Mobile monitoring VOCs Particle composition Air samplers VOCs pollution sources CEMs Sampling and analysis Mercury Cooking fume Automobile exhaust Site dust monitoring Water quality Calibrators and lab Agents
New products
AQMs
Mobile monitoring
VOCs
Particle composition
Air samplers
VOCs pollution sources
CEMs
Sampling and analysis
Mercury
Cooking fume
Automobile exhaust
Site dust monitoring
Water quality
Calibrators and lab
Agents
Xonteck-960 series tank cleaning instrument
Xonteck-960 series tank cleaning instrument
Product Description:
Consult Now Introduction
Product Description
The to-14 / 15 method used by EPA in the United States for the determination of VOC in ambient air includes collecting air samples with Suma can and analyzing them by GC. This method provides guidance on how to purify and calibrate the sampling tank by determining the residual VOC concentration after purification. Therefore, it is very important to clean the sampling tank thoroughly and correctly before use. 960 series automatic sampling tank cleaning system, the system can automatically or programmatically set the working cycle such as evacuation, filling, baking (100 ℃) to clean the sampling tank automatically, and can be filled with moisture to ensure the cleaning effect. After purification, make sure that there is no ∨ OCS in the sampling tank and that the vacuum degree is below 50 mtorrl.
Features

The system can be divided into two types: split type and oven type. The split type can clean four 6-liter or 15-liter Sumar tanks at the same time, and the integrated type can clean four 6-liter or 2-15-liter Suma tanks at the same time. The system has built-in vacuum vortex pump to replace the general primary vacuum pump and advanced vacuum pump, so that the instrument volume is smaller, the true space can be less than 50 mtorrl, and the no-load flow rate can reach 100 L / min, The heating power of each DC heating belt is 250 watts; the oven type heating power is 1000 watts, which is fast and efficient. All pipe joints of the system are made of 316L stainless steel or polytetrafluoroethylene, and special treatment is carried out to effectively reduce adsorption; the system is controlled by microcomputer, and the whole cleaning process is completed automatically, and there is a buzzer after cleaning, It is convenient for users to use. The system uses high precision absolute pressure sensor and vacuum sensor to monitor the internal pressure of sampling tank, which is more accurate and reliable, and ensures the purification effect

Scope Of Application
© 2020 新葡萄8883官网 鄂ICP备123456789号
Baidu
sogou